Extreme 54
|
||
| Specifications | ||
| Airframe Diameter | 57mm (2.26 inches) |
|
| Total Length | 1753mm / 175.3 cm (69 inches / 5 feet 9 inches) |
|
| Dry Weight (i.e. without motor) |
896 grams (32 ounces) |
|
| Motor Mount | 1 x 54mm (2.1 inches) | |
| Number of Fins | 3 | |
| Maximum Altitude | TBD | |
| Number of Stages | Single Stage | |
| Deployment System | Single stage | |
| Nosecone | Tangential Ogive | |
| Parachute(s) | 1 x nylon parachute | |
| Airframe Material | Cardboard | |
| Fin Material | Fibreglass | |
| Fin Thickness | mm ( inches) | |
| Launch Lugs | 2 x (1/8"x1/4") | |
| Minimum Recommended Motors |
TBD | |
| Motors | ||
| Single Use Motors | 54mm diameter motors (Aerotech composite propellant solid motors) | |
| Reloadable Motors | 54mm diameter motors (Aerotech composite propellant solid motors) | |
|
These minimum diameter models are designed for all out performance. Although the Extremes can be flown using the conventional motor charge for ejection, instructions are included to configure them for altimeter ejection. An altimeter mounting kit is included to install the altimeter in the payload section. Using an altimeter for deployment ensures that the parachute is deployed at apogee, reducing stress on the recovery system. This method has the added advantage of determining how high the rocket went. In addition to the complete standard instructions, additional modification instructions are included to beef up the Extremes for higher impulse motors. The Extreme 54 will allow you to really push the envelope in terms of all out altitude for 54mm diameter motor powered rockets. The 54mm motor mount is designed for motors such as Aerotech composite propellant solid rocket motors.
| ||
